ShieldGuard Pro - Premium Base Coating
Overview:
Easy to apply (one layer product)
Perfect Color and Gloss
Hydrophobic
Durability
Bottle Size: 50 ml
ShieldGuard Pro
Ceramic Ecoating by Polysiloxane is a high-performance protective coating designed to enhance the durability and aesthetics of your car. It produces, high-gloss, warm-looking and hydrophobic finish.
Before Coating After Coating
Product Description:
The main ingredients of ShieldGuard Pro are polysiloxane resins, fluorine compounds, silicone solvents, and AAC inorganic catalysts. After coating, polysiloxane resins undergo a cross-coupling reaction via AAC inorganic catalysts and then crystallize under air. After standing for a while, the coating layer turns into a crystal protective film with high transparency, hardness, good adhesion, and high durability. GlossGuard Pro will provide long-term protection for your car surfaces.
Application Information:
1. First, clean the target surface, and keep drying.
2. Shake the bottle, and then ShieldGuard Pro is poured on a special coating sponge. (or special microfiber cloth)
3. The target surface is divided into several small areas. Strongly recommend that each small area be 50cm x 50cm.
4. Following a cycle of the direction by the order of 1,2,3 ( see the picture below). Each small area is wiped 3 times.
5. Do the next after completion of a small area.
6. After application, let it stand for approx. 5 minutes at a humidity above 20% and temperature above 10°C. If the humidity and temperature of the environment are lower, you need to wait for a longer time (up to approx. 15 min.).
7. After standing, gently buff the target surface in straight lines back and forth with a clean and dry microfiber cloth. (note: do not polish around the target surface). During polishing use ideally two microfiber cloths at the same time. With the first cloth, wipe off most of the remaining product, with the second, Polish the surface to a high shine.
8. Polish the target surface until it is shiny and clean.
9. The user must make sure that no small areas are missing. If you have a smudge from the hardened coating on any part and it cannot be polished, you must polish the part by machine or by hand and reapply the ceramic protection.
10. After finishing, let it stand inside for about 24 hours. During this time, do not touch the paint layer, and protect it from water for 24 hours. Please note that users should avoid washing the car within 7 days.
